Minimoa
The Minimoa in all of her Glory. 170" of wood that is not hard to build. The fuse can be built in halves (left and right!) The fuse is sheeted with 1/16 and 1/32 ply and wood glue, if you want all wood fuse stained. CA glue will prevent staining. This was to be the "Dove of Peace" Varnished fuse and ply wing surfaces covered with linen/dope and trimed in red with many white stars on the leading edge of each wing. See Pic #2 for examples of ply panels. The spoilers are "barndoor" type, but extend above wing surface for better braking. See Pic #3 The stab is bolted on and can be easily removed for transportation. See Pic #5. Wing blades are 1/8" x 3/4" x 11", 2 each of 11" . See Pic #6 This plane will be completely yellow, painted to cover the excess CA glue marks
Optional items: Schempp-Hirth Spoiler kit and Cockpit kit.
Pic #2
Pic #3
Pic #4
Pic #5
Pic #6
The laser cut parts are by Bob Holman and the plans are from Chris Williams. The sheet and strip wood are from National Balsa. The plans are full size and the complete hardware package is included: wheel, wing blades, hinges, control rods and canopy, as well as the 25.0cm Schempp- Hirth Airbrakes, etc.
FULL KIT $389.95
